| 1. State or province where bee was collected [Explain] |
| 10AL 13CT 14DC 14DE 10FL 13GA 14IL 14IN 15KY 13MA 14MD 4ME 13MI 10MS 14NC 4NH 13NJ 13NY 2New Brunswick 1Newfoundland and Labrador 2Nova Scotia 14OH 13Ontario 14PA 2Prince Edward Island 4Quebec 13RI 14SC 1SD 14TN 14VA 4VT 14WI 14WV |
| 2. Head, labrum, labral process, length vs apical width [Explain] |
| 5Length EQUAL to apical width | 10Length LONGER than apical width | 6Length SHORTER than apical width |
|
|
|
| 3. Head, lateral ocelli, distance between inner edges |
| 3Clearly greater than ONE, but less than TWO ocellar diameters | 5Clearly greater than TWO ocellar diameters | 1Equal to ONE or nearly so | 8Equal to TWO or nearly so |
|
|
|
|
| 4. Head, vertex, width as measured from lateral ocelli to back edge of head |
| 11Clearly GREATER than one ocellar diameter | 2Clearly LESS than one ocellar diameter | 9EQUAL to one ocellar diameter or very nearly so |
|
|
|
| 5. Thorax, scutum, hair [Explain] |
| 7Hair standing straight up, generally of medium length | 7Hair suberrect, very short, appearing as if parted and combed away from the midline | 4Lacking hair |
|
|
|
| 6. Thorax, scutum, type of pits |
| 3Pits DISTINCT, deep, and tiny, interspaces DULL 8Pits DISTINCT, not as pin pricks, interspaces SHINY 3Pits INDISTINCT, minute, as pin pricks, interpit spaces SHINY 2Pits and surface ROUGH and rugose, pits OVERLAPPING and touching, pit outlines unclear |
| 7. Thorax, scutellum, pattern of pits [Explain] |
| 9Irregularly pitted, with some apparent bunching of pits | 8Uniformly and closely pitted throughout |
|
|
| 8. Abdomen, T1, depressed rim [Explain] |
| 7Pitted or textured as if with tiny, round pebbles | 9Smooth and shiny |
|
|
| 9. Abdomen, T1, pattern of pits - Not including depressed apical rim [Explain] |
| 3Pits DENSE, interspaces ROUGHENED and generally ONE pit diameter wide 4Pits DENSE, interspaces SHINY and generally ONE pit diameter wide or less - The interpit spaces may become somewhat larger near the rim 10Pits SPARSE, interspaces SHINY and generally TWO or more pit diameters wide |